Operation; Connection Indicator; First Time Use; Watching And Listening - Alecto DVM-700 Mode D'emploi

4

OPERATION

4.1 TO SWITCH ON/OFF:
Baby unit & parent unit:
• Briefly press and hold the button to switch on the unit.
• Briefly press and hold the button again to switch off the unit.
when switching on the baby unit, the night light will briefly illuminate

4.2 CONNECTION INDICATOR:

As soon as you switch on the parent unit or baby unit, it will start searching for the
other unit. The connection status is indicated as follows:
Baby unit (see LINK indicator):
• flashing green: the baby unit is searching for the parent unit.
• continuous green: de baby-unit is in contact with the parent unit.
• flashing red: the baby unit has lost the connection with the parent unit for over
30 seconds.
Parent unit (see display):
• text: 'Link lost, trying to reconnect': the parent unit is searching for the baby
unit.
• text: 'Unable to connect, ensure the monitor is turned on and within range' and
3 short beeps every 10 seconds: the parent unit has lost the connection with
the baby unit for over 30 seconds.

4.3 FIRST TIME USE:

When used for the very first time (or after briefly removing the batteries), the
parent unit will prompt you to set the time when switched on.
If this is not required:
press 'No' (the time can still be set at any moment)
If this is required:
1. press 'Yes'
2. press '12hr' or '24hr' to set the time format
3. adjust the time by pressing
adjusted separately)
4. press 'Next'
The parent unit will now ask you whether an introduction of some of the options
should be shown on the display.
and (the hours and minutes are
If this is not required:
1. press 'No' (this introduction may be requested at a later time)
2. press 'Exit' to switch on the parent unit as a baby video monitor
If this is required:
1. press 'Yes'
2. now follow the on-screen instructions.
• 'Next' = to continue
• 'Back' = to return to the previous subject
• 'Exit' = to end the introduction
When the introduction is finished, press 'Exit' to switch on the parent unit as a
video baby monitor or press 'Replay' to start the introduction again.
Now each time you switch on the parent unit again, the baby monitor function will
be activated directly. See chapter 4.7 for replaying the introduction.

4.4 WATCHING AND LISTENING:

During normal use, the images from the baby unit are shown on the display of the
parent unit. Now the following functions are available:
Reception volume:
• Press the – Vol. + button on top of the parent unit to adjust the reception
volume.
• While adjusting the volume, the current level is
indicated in the display.
• You may choose from 5 volume levels and sound
off.
• When the sound is switched off, the Mute indicator will be illuminated while
the icon appears in the upper part of the display as an extra indicator that the
sound is switched off.
Display on/off:
• Press the Screen On/Off button on top of the parent unit to switch off the
display; this won't affect the sound.
• Briefly press the Screen On/Off button again to turn
the display back on.
• A disabled display remains switched off, also when
the baby is crying.
• The display is switched on automatically in case of warnings (e.g. the feeding
alert).
41
Vol. Talk
Power Mute
Home
Vol. Talk
Power Mute
Home