Alecto DBX-62 Mode D'emploi page 91

Switching on the timer.
You can turn on the feeding alarm on the parent unit as follows:
1. briefly press the
screen
2. press and hold the M button for 3 seconds to
open the menu
3. use the
START TIMER
4. briefly press the M button to start the timer and to
leave the menu
• the timer time you have set will now appear in the
display directly underneath the name 'BABY' (or the name you
programmed yourself) and will slowly count down
• at 0.00 the unit will emit beep tones for up to 20 seconds while the
text 'FEEDING TIME' appears in the display
You can now also use the baby unit to turn on the alarm for the next
feeding time:
1. briefly press the
activate the alarm for the next feeding time, the
unit will emit 2 beep tones.
Attention: only when the baby unit is in
communication with the parent unit you can
turn on the alarm for the next feeding time. If you don't
hear 2 beep tones after pressing the
connection between the baby unit and parent unit is lost. You can now
speak into the baby unit to make it transmit (the red
press the button again or you can activate the feeding time alarm via
the parent unit.
button to activate the touch-
and buttons to select the option
button on the baby unit to
button, the
91
3
2
1
1
light turns on) and
4
/