Display Light Brightness; Name Of The Baby Unit - Alecto DBX-62 Mode D'emploi

5.3 DISPLAY LIGHT BRIGHTNESS:

You can adjust the intensity of the display light as follows:
1. briefly press the
2. press and hold the M button for 3 seconds to
open the menu
3. use the
BRIGHTNESS
4. briefly press the M button
5. use the
brightness
6. briefly press the
and to leave the menu
• you can choose from 8 brightness levels
• a high brightness level ensures good readability, but also uses more
power.

5.4 NAME OF THE BABY UNIT:

Instead of the standard name "BABY-1" of the baby unit, you can program
your own chosen name.
1. briefly press the
2. press and hold the M button for 3 seconds to
open the menu
3. use the
NAME
4. briefly press the M button
5. use the
baby unit (only when using multiple baby
units)
6. briefly press the M button, 'BABY 1' will
appear in the display (or another name you already set earlier) and
the cursor ( _ ) will flash underneath the first letter
7. change the first letter using the
the M button
8. repeat step 7 until the name is fully entered
9. briefly press the
menu
• you can choose any of the 26 letters in the alphabet, the numbers
0-9 and a space
button to activate the touch-screen
and buttons to select the option
and buttons to select the desired
button to confirm you selection
button to activate the touch-screen
and buttons to select the option
and buttons to select the desired
button to confirm you selection and to leave the
and buttons and briefly press
94
3 5
/
4
2 /
6
1 /
5
3 7
/ /
4 6
2 / /
9
1 /