How To Use; On/Off Switch; Parent Unit - Alecto DVM-260+ Mode D'emploi

4

HOW TO USE

4.1

ON/OFF SWITCH:

Baby unit:
• To put on, slide the switch located on the back of the baby unit to ON.
• To put off, slide the switch located on the back of the baby unit to OFF.

Parent unit:

• Press the button
• Press the button
4.2 PARENT UNIT:
Volume:
• Press the
• Press the
• There are seven levels of volume and volume-off which may be selected.
• The right side of the display will show the level of volume while selecting.
• The light on the bottom right of the display will come on if you select the volume sound to 0
Sound Light Indicators:
•
assist you to keep an eye on your baby if the volume is set to low, off, or if the baby monitor is
located further away in the room.
Talk Back:
• Press the button
(Press and hold down while speaking)
• The light on top of the display will come on when talking.
•
Sound-control on / off (VOX):
• When the VOX function is enabled, the image and sound will go off when the baby is sleeping
and will turn on when the baby makes noise.
•
when selected. Press the VOX icon button again to switch off.
• The level of sensitivity is adjustable, see paragraph 4.5, under 'sensitivity level'.
for 2 seconds in order to turn the parent unit on.
again for 2 seconds in order to turn the parent unit off.
button to increase the volume.
button to decrease the volume.
on the parent unit to talk to your baby through the baby unit's loudspeaker.
65