How To Use; On/Off Switch; Parent Unit; Menu Display Functions & Settings - Alecto DVM-50 Mode D'emploi

4

HOW TO USE

4.1

ON/OFF SWITCH:

Baby unit:
• Slide the ON/OFF switch to ON in order to turn the baby unit on.
• Slide this switch to OFF to turn the baby unit off.

Parent unit:

• Press the
• Press the
4.2 PARENT UNIT:
Receiving volume:
• Press the
• Press the
• You have a choice of five levels of volume and volume off.
• The level of volume is shown on the display when adjusting.
The 'volume off' icon '
Zoom:
• Press the
display X2.
• Press the
Picture on/off:
• Press once on the
• Press once on the
4.3 MENU DISPLAY FUNCTIONS & SETTINGS:
Press the
Setting the display brightness:
1. Press 1x on the
2. Use the
3. Press 1x on the
Nightlight:
1. Press 2x on the
2. Use the
3. Press 1x on the
Switch image + sound to turn off automatically (when used as a baby monitor, if the baby sleeps):
1. Press 3x on the
2. Use the
OFF = the feature is switched off, you will still continue to have picture and sound.
vity).
sensitivity).
3. Press 1x on the
When the VOX is switched on, the word VOX will appear at the top of the display.
If the picture and sound have been automatically switched off when the baby is silent, you can
press the
30
button for 2 seconds to turn the parent unit on.
button again for 2 seconds to turn the parent unit off.
button to increase the receiver volume.
+
-
button to decrease the receiver volume.
' will be shown at the top of the display.
button for 2 seconds to zoom in to the Image (close up). The top of the display will
button for an additional 2 seconds for a normal picture.
button to turn off the picture.
button to turn the picture off.
button on the parent unit to open the menu. The screen will display the following icons:
button.
-
and buttons to set the brightness
+
button to save the setting and exit the menu.
button.
-
and buttons to switch the nightlight on baby unit either (ON) or (OFF).
+
button to save the setting and exit the menu.
button.
-
and keys to set the level of sensitivity:
+
= the picture and sound will be switched on when there is a loud noise (= low sensiti-
= picture and sound are switched on when there are soft sounds (= high
button to save the setting and exit the menu.
button to turn the picture and sound temporarily back on again.