Settings; Microphone Sensitivity And Transmission Indication; Display Languages - Alecto DBX-62 Mode D'emploi

5 SETTINGS

5.1 MICROPHONE SENSITIVITY AND TRANSMISSION INDICATION:

You can set on which sound level the baby unit starts transmitting.
For this, use the + and – buttons on the baby unit.
+ button, higher sensitivity
- button, lower sensitivity
While in use, the light
sounds to the parent unit. When you are in the baby room, use this light
to check the sound level that triggers the baby unit.

5.2 DISPLAY LANGUAGES:

The various settings and notifications in the display of the parent unit can
be shown in different languages. In the factory the unit is set to the Dutch
language, but you can select another language as follows:
1. briefly press the
2. press and hold the M button for 3 seconds to
open the menu
3. use the
LANGUAGE
4. briefly press the M button
5. use the
language
6. briefly press the
and to leave the menu
• you can choose from: Dutch, English, Italian, Spanish, French and
German
During setup, the light
selected level:
• 1x flash: the baby must cry loudly before the baby
unit starts transmitting
...
• 5x flashes: the baby unit will start transmitting at
any low sound
will turn on when the baby unit is transmitting
button to activate the touch-screen
and buttons to select the option
and buttons to select your desired
button to confirm you selection
will flash to indicate the
93
5
3
/
4
2 /
6
1 /