Baby-Unit - Alecto DBX-62 Mode D'emploi

3.2 BABY-UNIT:

The baby-unit is powered by the supplied power adaptor with the small
plug.
For mobile use, you can install 3 batteries (excl.).
3. Place the battery cover back onto the baby-unit and lock it using the
locking tab.
When connecting the power adapter, you can leave the batteries in
place. By inserting the adaptor plug, the batteries will be automatically
disconnected.
cause damage to the baby intercom
or even fire.
1. Fold out the table stand and slide the
battery cover downwards off the baby unit.
2. Install 3x ordinary alkaline batteries, 1.5 V,
type AAA according the markings inside the
battery compartment.
You may also install rechargeable batteries,
but because the baby-unit is not provided
with a charger function, you must recharge
these batteries using an external battery
charger.
86
Only connect the supplied
adaptor. Connecting any
other power adaptor can