Instructions For Use And Manoeuvre - breviglieri mini master Manuel D'utilisation Et D'entretien

Dimension and weight (machine shut off in transport position)
Height ( H )
Lenght ( P )
Width ( L )
Height with disassembled arms ( H1 )
Length with disassembled arms ( P1 )
Total weight
Cylinder operating circuit
Max. working pressure
Tractor's specifications
Minimum weight
Minimum power
Power takeoff with rotation
Three points linkage
Auxiliary directional control valves 2

Instructions for use and manoeuvre

Prior to engaging the tractor's power take-off :
Check that the machine's power take-off turns in the right direction and check also the number of revolutions indicated on the
plate situated near the power take-off itself.
Check that the control devices for the cylinders and the cutting
apparatus are in the 'machine stop' position.
Adjusting the cutting height: to alter the cutting height of the cutter, the side supports on the rear supporting roller should be
adjusted. By adjusting the position of the fixing bolts, the cutting height is altered accordingly. In order to have a uniform cutting
action the position of the bolts on both sides of the head should be the same. The machine must remain motionless with its
cylinders locked and the tractor's power take-off disengaged while this operation is being carried out.
Tools: the cutting head is equipped with knives polyvalent to a "Y" shape or hammer. Every day check their general condition and
state of wear. If you find that, by accident, some knives/hammer have been damaged, replace them in pairs. If you discover that
the knives/hammer have become worn out due to prolonged use, replace the entire series, taking care to reassemble them in the
original position. Use only original tools, ordering them from our authorised retailers, or directly from ourselves, the manufacturer.
On no occasion use tools that are different from the original as they could cause disturbing and possibly dangerous vibrations
as a result of rotational imbalance.
mini master
2611 PSI
mini master 120 mini master 150
2756 lb 3858 lb
25 HP - 18kW 35 HP - 26 kW
540 rpm 540 rpm
I° I°
2
mini master 120 mini master 150
39" in.
63" in.
55" in.
31" in.
35" in.
650 lb
- 17 -
39" in.
63" in.
67" in.
31" in.
35" in.
761 lb
macchine agricole