Use; Identification; Noise Level; Technical Specifications - breviglieri Hypermaster XL 180 Manuel D'utilisation Et D'entretien

1.3.3 USE

The Hypermaster XL cutter has been designed for agricultural or semi-professional uses, ground care, for work on the sides
and banks of rivers and ditches and/or for cutting operations on the field where it can be used to shred grass and woody
plants. One single operator seated on the tractor is able to carry out the various operations required. The machine has been
designed for use on agricultural-forestall land. It is therefore not suitable for excavation work of any kind. The cutting height
should be chosen with care to prevent the cutting tools from hitting against stones or other objects that could damage the
machine itself. Any other use of the machine differing from the explanations given in this manual relieves for Manufacturer
from all and every liability for deriving damage to persons, animals or property.

1.4 IDENTIFICATION

Each machine is provided with an identification plate (20 Fig. 1) with the following data:
▪ «CE» marking
▪ Manufacturer's name and address
▪ A) Machine model
▪ B) Machine version
C) Serial number
▪
▪ D) Weight (in kg)
▪ E) Year of manufacture
The data on the identification plate of the machine should be copied into the last page of this manual and must always be stated
when spare parts and/or assistance are required.
Standard machine supply includes:
▪ Driveline
Operation and maintenance manual for the machine
▪
▪ «CE» declaration of conformity

1.5 NOISE LEVEL

The noise level (overhead noise) has been measured in compliance with the current laws, with the following results:
▪ Acoustic pressure LpAm (A)
▪ Acoustic power LwA (A)
The operator is advised to wear adequate ear muffs as personal protective equipment to prevent damage to his hearing during

1.6 TECHNICAL SPECIFICATIONS

Model
Hypermaster XL 180
Hypermaster XL 200
Hypermaster XL 220
Hypermaster XL 250

SECTION 2

General safety regulations

2.1 SAFETY NOTES

The user must inform his personnel about the risks deriving from accidents, about the safety devices installed to safeguard the
Hypermaster XL
.................................................................................................................................... dB 84
.......................................................................................................................................... dB 99
daily work with the machine.
Working Weight kg
width
in lbs
71.65 1786
78.74 1874
86.22 1962
98.03 2105
CAUTION
Power required
HP kW
80 - 120 59 - 88
80 - 120 59 - 88
90 - 120 66 - 88
90 - 120 66 - 88
- 22 -
N° cutting tools
Hammers Knives
16 48
18 54
20 60
22 66
Cutting
height
in
0.79 - 2.75
0.79 - 2.75
0.79 - 2.75
0.79 - 2.75