Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
macchine agricole
DIMENSIONS
Model
25
s - 85
b
25
s - 105
b
25
s
- 125
b
1.3.1 DESCRIPTION
25
The
s Rotary Tiller mainly comprises a metal framework with a central linkage and three-point hitches (1 Fig. 1), and a bladed
b
rotor situated in the lower part (9 Fig. 1) driven by a gearbox installed at the side (6 Fig. 1). The power required to operate the
machine is transmitted by the tractor via a driveline (with CE marking) which meshes with the gearbox/final drive unit in a central
position (5 Fig. 1), and is subsequently transmitted to the gears by a drive shaft.
1.3.2 USE
25
The
s has solely been designed for use in agriculture in order to work and break up the soil. One single operator seated
b
on the tractor is able to carry out the various tillage operations. Any other use of the machine differing from the explana-
tions given in this manual relieves for Manufacturer from all and every liability for deriving damage to persons, animals or
property.
1.4 IDENTIFICATION
Each machine is provided with an identification plate (15 Fig. 1) with the following data:
▪
«CE» marking
▪
Manufacturer's name and address
▪
A) Machine model
▪
B) Machine version
▪
C) Serial number
▪
D) Weight (in kg)
▪
E) Year of manufacture
The data on the identification plate of the machine should be copied into the last page of this manual and must always be stated
when spare parts and/or assistance are required.
Standard machine supply includes:
▪
Driveline
▪
Operation and maintenance manual for the machine
▪
«CE» declaration of conformity
D
A
B
38"
33,5"
46"
41,34"
54"
80,71"
25
s
b
Fig.2
C
33,66"
- 20 -
B
A
D
27,56"
Publicité
Table des Matières
