PRODUCTS RECOMMENDED FOR CENTRAL EUROPEAN CLIMATES
LUBRICATING OIL
GREASE
NB. - FOR PARTICULAR CLIMATE CONDITIONS PLEASE CONSULT WITH OUR TECHNICAL OFFICE .
INSPECTIONS BY QUALIFIED PERSONNEL
For inspections or checks that do not come under the category of periodical maintenance as cited previously (replacement of
pipes, pumps, motors or other hydraulic components) must only be carried out by specialised staff. The manufacturer is always
at your disposal to direct you to the nearest Service Centre.
Machine out of service
When a long period of machine disuse is envisaged or the end of season has been reached, it is advisable to:
1) Thoroughly wash the machine.
2) Check that there are no damaged or worn parts.
3) Thoroughly grease all the pins, arm slide rails, rotor shaft and rear roller bearings.
4) Check all the screws and bolts.
5) Cover the machine with a large sheet and keep it sheltered from the elements at a temperature between 32 and 86°C inclusive.
Road traffic
During road traffic the machine must be locked up in the transportation position with the appropriate locking devices in place.
Scrupulously observe the regulations of your country's highway code.
Warranty
Any complaints will only be taken into consideration if they are submitted in writing within eight days of receiving the goods.
The warranty will remain valid for 12 months with effect from the date of delivery. Bearings, belts and propeller shafts which
follow the norms of their respective manufactures are excluded from warranty.
During the 12 months of warranty the manufacturer is committed to supplying the piece or pieces recognised as defective by
its own Technical Office. The customer is responsible for the labour, the consignment and any packing. The customer will only
be able to assert his rights of warranty by having complied with the conditions regarding the terms of the warranty indicated
in the supply contract. The warranty will be forfeited immediately if one of the following instances are found to be in evidence:
- alterations to the machine carried out by the customer
- irrational use of the machine
- obvious negligence in maintenance
- use of replacement parts that are not original or oils that are not recommended.
mini master
EP 150
EPL 2
- 19 -
macchine agricole