Machine Description; Technical Data - breviglieri mini master Manuel D'utilisation Et D'entretien

macchine agricole

Machine description

The machine is made up of a frame with 3 point linkage, for a rapid fixing to and removal from the tractor.
The arms are hinged to this frame and the cutting apparatus itself is affixed to the other end.
The controls for the arm movements and to operate the cutting apparatus are easily identified.
The cutting apparatus is equipped with guards both in front and behind to avoid the escape of stones or other material during
the cutting process.
Locking devices are installed on the cylinders and are introduced at the transportation and maintenance stages.
The machine has been exclusively devised and designed to carry cutting apparatus and/or accessories of our manufacture.
Any alteration to the said equipment or the assembly of different equipment without our prior authorisation in writing, forfeits
any kind of responsibility on our part as well as the warranty on the product itself.

Technical data

Cutting equipment
Max. distance from tractor's centre (A)
Min. distance from tractor's centre (C)
Left side max. (B)
Lateral movement (S)
Max rear distance (D)
Inclination upwards(R)
Inclination downwards (Q)
Cutting width (L)
Cutting heigth (adjustable)
Rotor's cutting diameter
Rotor's maximum rotation speed
Rotation direction
Number of hammers / knives
Absorbed power
mini master
mini master 120 mini master 150
69" in. 81" in.
28" in. 28" in.
28" in. 39" in.
43" in. 43" in.
63" in. 63" in.
90° 90°
65° 65°
45" in. 57" in.
8"- 23" in. 8"- 23" in.
15" in. 16" in.
2700 rpm 2700 rpm
clockwise clockwise
48 56
25 HP - 18kW 35 HP - 26kW
- 16 -