Preparing The Connection To Chimney - Dovre Vintage 50 Installation Et Mode D'emploi

recommended that a rubber mat is used under the
legs.
Door lock
The appliance is supplied with the latch button
installed. You can decide to use the latch button as a
"cold hand".
1. Loosen nut (2) slightly and loosen the set screw
(3) until the latch button is released.
2. Re-tighten nut (2).
3. Install the latch retainer on the base, see figure.
8
4. Place the latch button into the latch retainer, see
figure.
Preparing the connection to
chimney
When connecting the appliance to a chimney, you can
choose the top or rear of the appliance.
When the appliance is delivered, the
connection on the rear is left open.
Plug the outlet that you don't want to use with the
corresponding cover that was supplied.
Subject to change because of technical improvements