Preparing The Connection To The Flue - Dovre BOLD 300 Installation Et Mode D'emploi

5. Remove the fire-resistant inner plates; see the fol-
lowing figure:
a. First remove the baffle plate (05).
b. Remove the inner plates right (07) and left (08).
c. Remove the rear inner plate (06).
d. Remove the fire basket at the front (09).
e. Remove the fire basket left (04) and right (03).
f. Remove the fire basket at the back (02).
g. Remove the grate (01) and the ash pan (10).
Vermiculite inner plates are light and tend
to be ochrous in colour on delivery. They
insulate the combustion chamber to boost
combustion.
08
04
02
09
10
8
09-20021-093
05
06
07
03
01
09-20021-099
Removable internal parts
01 fire compartment base
02 fire basket rear
03 fire basket right
04 fire basket left
05 baffle plate
06 rear inner plate
07 inner plate right
08 inner plate left
09 fire basket front
10 ash pan
Preparing the connection to
the flue
When connecting the appliance to the flue, you can
choose to connect to the top or to the rear of the appli-
ance
Connecting to the top
As standard, the appliance is delivered with the con-
nection collar fitted for a connection at the top, see fol-
lowing figure.
1
2
3
4
Connecting to the back
For a connection to the rear, the position of the con-
nection collar needs to be changed. The connection
collar is attached with 2 M8 nuts (key 13). Proceed as
follows:
Disassembly (see previous drawing)
1. First remove the baffle plate.
Subject to change because of technical improvements.
5 6
9
4
8
7
09-20021-100