Preparing The Connection To The Flue - Dovre TAI 45 W Installation Et Mode D'emploi

combustion.
6
7
1
3
4
Removable internal parts
1 left-hand bottom of the fire compartment
2 right-hand bottom of the fire compartment
3 fire basket
4 ash pan
5 ash removal port
6 side inner plate left and right
7 back inner plate left and right
8 baffle plate below
9 baffle plate above
6
10
1
3
4
Removable internal parts
1 left-hand bottom of the fire compartment
2 right-hand bottom of the fire compartment
3 fire basket
4 ash pan
5 ash removal port
12
9
8
5
6
7
2
09-20021-113
8
7
10
5
9
2
09-20021-114
6 side inner plate left
7 baffle plate below
8 baffle plate above
9 side inner plate right
10 back inner plate left and right
Preparing the connection to
the flue
When connecting the appliance to the flue you have
the choice of connecting via either the top or the rear.
See the paragraphs "Connecting to the rear" and "Con-
necting to the top".
Connecting to the rear
1. Remove the connection collars (2) and the sealant
(3) from the top of the stove.
2. Remove the protection plate from the back shield
with the assistance of a screwdriver; see following
figure.
3. Remove the cover (6) from the back wall.
4. Fit the connection collar (2) and the sealant (3) to
the back wall using the materials supplied (1,4,5).
5. Fit the cover (6) to the top plate using mounting
materials (4,5,7,8).
Subject to change because of technical improvements
09-20020-364