Digital Operation Functions; Station Operation - A Possible Scenario; Room For Customisation - Roco 41273 Manuel D'utilisation

Masquer les pouces

Table des Matières

Les langues disponibles

The set (locomotive and carriage) can be operated via Address 3 when in the deliv-ery state. The function train

has 19 functions. The function keys have been designed in such a way that users with only a few function keys

can also use the main func-tions (pantographs, doors, sounds, lights) without difﬁculty.

The 20 function keys on the multi MAUS make it especially comfortable to use.

Please refer to the chapters `Operation with Märklin

Station´ if you use the Märklin

Station operation – a possible scenario:

The locomotive driver climbs into cabin 1 and switches the driver's cabin light on ﬁrst.

He now triggers the lifting of a pantograph, the rear one in normal running op-eration.

He activates the main switch, the compressor runs brieﬂy.

If the train is at the platform, the passengers can get in from the platform side.

The interior lighting is switched on in the three carriages.

The station announcement or conductor's announcement can be heard.

After all of the passengers have got on the train, the conductor gets on with a short

departure whistle and closes the last door.

Ready for departure: the locomotive driver switches the exterior lighting on and the

cabin lighting which is no longer required, off.

With a short whistle, the locomotive driver carefully gets the train moving.

The train accelerates on an open stretch and blows a long whistle when

ap-proaching a level crossing.

Room for customisation

The locomotive and the carriage can obviously be operated at different addresses independent of each other.

The locomotive and each of the carriages is provided with a fully self-supporting multiprotocol decoder for

this purpose.

The locomotive and the carriage are provided with selectable, easily adjustable func-tion key groupings for

the simple operation with its own address.

The function keys can also be occupied with random functions by means of the `function mapping´.

When reading through this instruction manual and trying it out for the ﬁrst time, you will notice that the

model has taken another great step in the direction of the original with this set.

Please remove the carriage from the tracks when programming the locomotive as this will other-

wise also be programmed.

Please remove the locomotive from the tracks when programming the carriage as this will other-

wise also be programmed.

Digital Waggon.indd 25