Combination For Cv 29; Operation With A Dcc Command Station (Multimaus®); Programming Modes; More Functions - Roco 23 Serie Manuel

▪ Combinations for CV29
Bit 0 Direction of Travel
Bit 1 Speed Step
Bit 2 Operating Mode
Value Short address
Bit 5
Value Long address
▪ Operation with a DCC Command Station (MULTIMAUS®)
As the (MULTIMAUS®) has 20 function keys and a light button, can be especially comfortably operated.

Programming modes:

The locomotive and carriages react to all DCC programming modes.
We recommend: direct CV programming (byte by byte) or POM mode (programming on main track).
The programming is described in the MULTIMAUS® manual.
Reading CVs:
With the appropriate equipment (e.g. / Z21 / z21 / z21start), you can read the value byte by byte and bit by bit.

▪ More Functions

You can find out about a range of other possible set-tings, which are probably very rarely needed, relating to drive speed curve, load control
setting or noise synchronization from the detailed handbook. This can be downloaded as a pdf document MX645P22 from www.zimo.at.
CV29
normal switched normal switched
14 14 28/128 28/128
digital digital digital digital
0 1 2 3
32 33 34 35
normal switched
14 14
analog+digital analog+digital analog+digital analog+digital
4 5
36 37
normal switched
28/128 28/128
6 7
38 39
45