Operation With A Dcc Centre ( Multi Maus); Programming Modes; Reading Out; Function Key Grouping For Operation At Own Address - Roco 41273 Manuel D'utilisation

Operation with a DCC Centre ( multi MAUS)

As the multi MAUS has 20 function keys and a light button, the entire set can be especially comfortably
operated.

Programming modes:

The locomotive and carriages react to all DCC programming modes.
We recommend: direct CV programming (byte by byte) or POM mode (programming at the main
track).
The programming is described in the multi MAUS manual.

Reading out:

With the appropriate equipment (e.g. Rocomotion 10785), you can read the value out byte by byte and bit
by bit.

Function key grouping for operation at own address

If you wish to operate the carriage(s) separately, i.e. at another address that the locomotive, you can simply
pool the functions which are distributed in the set in the form of a block.
To do so, program the value 1 via CV61.
Experts can also "map" the functions individually (see Annex):
F-Key Function
F00 Carriage tail light
F01 Carriage doors corri-dor side
F02 Carriage doors
compartment side
F03 Interior carriage lighting
F04* Conductor's whistle
F05* Conductor's announcement
"All on board please!"
*) The 2 class carriage is the conductor's carriage in the delivery state. Each of the car-riages can be
nd
set as being a conductor's carriage via CV62 if required.
Digital Waggon.indd 33
Function Type Direction-
related
ON/OFF
OPEN/CLOSE
OPEN/CLOSE
ON/OFF
ON
ON/OFF
GB
Additional
sound





33
22.10.2008 09:53:13