CV list for the carriage
CV
Name
1
Carriage address
7
Version number
GB
8
Manufacturer identification Manufacturer ID of Modelleisenbahn GmbH
13
Analogue F1-F8
14
Analogue Lamp, F9-F14
17
Long address
18
29
Configuration
See table in the
"CV combinations chapter"
Function Mapping
33
- 54
56
Extended configuration
Function keys grouping
61
Carriage configuration
62
63
Dimming of the interior
lighting
30
Digital Waggon.indd 30
Description
The decoder reacts to the address range 1-127, the
other controllers address 1-99 via the short address, the rest
via the long address (CV17/18)
IInternal decoder software
Describing with value 7 results in a resetting
of the doors to the delivery state
Describing with value 8 results in a resetting of the CVs
to the delivery state.
Function key in analogue mode
Function key in analogue mode
high-value byte (hByte)
low-value byte (nByte)
Calculation: long address=(hByte-192)x256+nByte
e.g.:
Adr 170:hByte=192, nByte=170
Adr 270:hByte=193, nByte=14
Adr 370:hByte=193, nByte=114
Bit 0: direction reversal
Bit 1: running steps (DCC)
Bit 2: analogue operation
Bit 5: long address
With CVs, one can allocate functions to each of the function keys
(see annex "function mapping")
Bit 0: store function keys
Märklin
Bit 3: 2
1)
address
nd
automatically writes CV33-54
Value 0: standard occupancy for set with loc. at same address
Value 1: for DCC operation at own address
Value 2: for Märklin
6021 operation at own address
1)
Value 3: for Märklin
Mobile Station operation at double address (loc. database 37540)
1)
Bit 0: manual conductor
Bit 1: automatic conductor whistle
Bit 2: automatic conductor announcement
Bit 3: fast closing
--> short time for closing of the doors:
The conductor announcement from another carriage is not waited for.
Fast closing is not applicable if the carriage is a conductor carriage.
The brightness of the interior lighting can be set via this CV.
multi MAUS
and
22.10.2008 09:53:12
F7: in
F0: ta
You d
prog
A
0: no
0: 14
0: OF
0: us
32: u
0: sw
0: sw
0: OF
0: OF
0: OF
0: OF