Operation With A Dcc Command Station (Multimaus®); More Functions - Roco 85 Serie Manuel

▪ Operation with a DCC Command Station
(MULTIMAUS®)
As the (MULTIMAUS®) has 20 function keys and a light button, can be especially comfortably operated.
Programming modes:
The locomotive and carriages react to all DCC programming modes.
We recommend: direct CV programming (byte by byte) or POM mode (programming on main track).
The programming is described in the MULTIMAUS® manual.
Reading CVs:
With the appropriate equipment (e.g. / Z21 /z21 / z21start), you can read the value byte by byte and bit by bit.

▪ More Functions

You can find out about a range of other possible set-tings, which are probably very rarely needed, relating to drive speed curve, load control
setting or noise synchronization from the detailed handbook. This can be downloaded as a pdf document MX645P22 from www.zimo.at.
72266-920 Beu überarbeiten CV und Layout.indd 45 72266-920 Beu überarbeiten CV und Layout.indd 45
45
28.03.2022 09:07:38 28.03.2022 09:07:38