Cleaning The Machine - Stihl MH 610 Manuel D'utilisation

Masquer les pouces Voir aussi pour MH 610:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Risk of injury!
Always wear gloves to
prevent injuries from
sharp-edged
components.
The hoe assembly together with the
plant protection disc can be
removed from the drive shaft by
removing the folding retainer next
to the gearbox housing.
The plant protection discs and hoes
are removed in the same way on
both sides.
Removing the plant protection discs:
● Allow the machine (engine, gearbox) to
cool down completely.
● Lift the tiller slightly in a horizontal
position with the help of a second
person.
● Fold open the securing clip of folding
retainer (1) and remove the folding
retainer.
● Remove plant protection disc (2).
30
Removing the hoes:
● Allow the machine (engine, gearbox) to
cool down completely.
● Lift the engine slightly in a horizontal
position with the help of a second
person.
● Fold open the securing clip of folding
retainer (1) and remove the folding
retainer.
● Remove hoe (2).

12.2 Cleaning the machine

Maintenance interval:
After each use
● Clean the entire machine thoroughly
after each use. Care of the machine will
protect it against damage and extend its
service life.
● Before cleaning, allow the machine to
cool down completely, detach the spark
plug socket and wear long sleeves and
thick gloves during cleaning work on the
gearbox and hoes.
Cleaning and maintenance position:
Avoid damage to the machine!
Make sure that neither oil nor petrol
escapes. Place the machine in the
upright position during storage.
● Place the transport wheel in the
transport position.(
11.4)
● Move the machine onto firm and level
ground.
● Park the tiller as shown and make sure
that it is stable.
Notes on cleaning:
● Remove the dirt and accumulated
deposits using a brush, a damp cloth or
a stick – do not use aggressive cleaning
agents. STIHL recommends the use of
a special cleaner (e.g. STIHL special
cleaner).
● Never spray water onto the handlebar,
engine components, seals or bearing
points. This would result in expensive
repairs.
● Engine:
Remove dirt from the cooling ribs, fan
wheel, area around the air filter,
exhaust, etc. to ensure that the engine
is adequately cooled.
0478 404 8800 A - EN

Publicité

Chapitres

Table des Matières
loading

Table des Matières