Installing The Lower Handlebar - Stihl MH 610 Manuel D'utilisation

● Additionally secure transport wheel (1)
with pin (2) and spring clip (3).

7.7 Installing the lower handlebar

● Fit lower handlebar (F) onto mount (1)
on the basic unit.
0478 404 8800 A - EN
● Pull release lever (lateral handlebar
adjustment) (1) upwards and then allow
to engage in centre position (2).
● Fasten lower handlebar with bolt (1).
7.8 Installing the upper handlebar
Danger of crushing!
There is a danger of pinching when
actuating the release lever (height
adjustment).
Pay attention to moving parts!
Make sure that the cables are
positioned correctly. They must not
be knotted.
● 1 Press release lever (height
adjustment) (1) downwards and hold.
● 2 Insert upper handlebar (2) at lower
handlebar (3).
● Position upper handlebar (2) at centre
detent (4). Release release lever
(height adjustment) (1) and allow upper
handlebar (2) to engage.
19