Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Exercise extreme caution when using
this method of cutting. The higher the
cutting attachment is off the ground, the
greater the risk of injury from cuttings
being thrown sideways.
Warning! Improper use may damage the
shredder blade – risk of injury from
thrown parts.
To reduce the risk of injury it is essential
to take the following precautions:
Avoid contact with stones, rocks,
–
pieces of metal and other solid
foreign objects.
Never cut wood or shrubs with a
–
stem diameter of more than 2 cm.
Inspect the shredder blade at
–
regular short intervals for signs of
damage. Do not continue working
with a damaged shredder blade.
Resharpen the shredder blade
–
when it has dulled noticeably and
have it balanced if necessary (by
servicing dealer).
Circular Saw Blade
Suitable for cutting shrubs and trees with
a maximum stem diameter of 7 cm.
Before starting the cut, accelerate the
engine up to full throttle. Perform cut
with uniform pressure.
Use circular saw blades only with a
matching limit stop of the correct
diameter.
To reduce the risk of blade damage,
avoid contact with stones and the
ground. Resharpen the blade properly in
FS 260 C, FS 360 C
good time – dull teeth may result in the
blade cracking and shattering and
causing serious injury.
When felling, maintain a distance of at
least two tree lengths from the next
felling site.
Risk of kickout
The risk of kickout is highest in the black
area of the blade: Do not use this area of
the circular saw blade for cutting.
There is also a risk of kickout when
using the lighter shaded areas of the
blade: These areas of the blade should
only be used by experienced operators
with specialized training.
STIHL recommends that you use the
non-shaded area of the circular saw
blade. Always start the cut with this area
of the blade.
English
11
Publicité
Chapitres
Table des Matières
