Mounting The Deflector - Stihl FS 260 C Notice D'emploi

Mounting the Deflector

Use the Right Deflector
1
Deflector (1) is approved for mowing
heads only and must therefore be
mounted before fitting a mowing head.
2
Deflector (2) is approved for grass
cutting blades and brush knives only and
must therefore be mounted before fitting
a grass cutting blade or brush knife.
FS 260 C, FS 360 C
3
Deflector (3) is approved for shredder
blades only and must therefore be
mounted before fitting a shredder blade.
4
5
The limit stop (4) is approved as a
deflector for circular saw blades only
and must therefore be mounted before
fitting a circular saw blade. It is also
necessary to change the guard ring (5),
see "Mounting the Cutting Attachment" /
"Mounting Circular Saw Blades".
Mounting the Deflector
Deflectors (1 to 4) are mounted to the
gearbox in the same way.
7
6
Remove dirt from joints on gearbox
N
and defelector – make sure that no
dirt gets into the screw holes in the
gearbox.
Place the deflector on the
N
gearbox (6).
Insert the screws (7) and tighten
N
them down firmly.
English
17