Specifications - Stihl FS 260 C Notice D'emploi

English
4 Metal Mowing Tool
The cutting attachment, i. e. blade,
made from metal for different
purposes.
5 Deflector for Metal Mowing Tools
Designed to reduce the risk of injury
from foreign objects flung
backwards toward the operator by
the cutting attachment and from
contact with the cutting attachment.
6
6 Shredder Blade
7 Deflector for Shredder Blade
Definitions
6 Shredder Blade
Cutting attachment made of metal
for shredding, thinning and clearing
sturdy growth.
7 Deflector for Shredder Blade
Designed to reduce the risk of injury
from foreign objects flung
backwards toward the operator by
the cutting attachment and from
contact with the cutting attachment.
46
8
8 Circular Saw Blade
9 Limit Stop for Circular Saw Blade
Definitions
7
8 Circular Saw Blade
Cutting attachment made of metal
for cutting wood.
9 Limit Stop for Circular Saw Blade
Designed to position the brushcutter
steady against the wood in order to
reduce the risk of injury from loss of
control from reactive forces such as
thrust out.

Specifications

EPA / CEPA
9
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category
A = 300 hours
B = 125 hours
C = 50 hours
Engine
Single cylinder two-stroke engine
FS 260 C - E
Displacement:
Bore:
Stroke:
Engine power to ISO
8893:
Idle speed:
Cut-off speed (rated): 12,500 rpm
Max. output shaft
speed (cutting
attachment):
3
41.6 cm
42 mm
30 mm
2.0 kW (2.7 HP)
at 9,000 rpm
2,800 rpm
9,000 rpm
FS 260 C, FS 360 C