Cleaning Of The Capp In Cup System - Gaggia Milano CADORNA MILK Mode D'emploi

English
26
4219-450-08051 MANUAL GAG. CAD. MILK EN-FR 120US.indd 26

Cleaning of the Capp in Cup system

Capp in Cup system cleaning programs
The machine has two programmes for cleaning the Capp in Cup system: quick
clean and deep clean. Both programmes can be selected using the
CLEAN/SETTING button then pressing the " CLEAN " button.
Quick clean is also proposed after dispensing a milk-based beverage. For both
clean/setting
programmes, follow the instructions shown on the display
Quick clean programme
-
The quick clean programme includes the cleaning of the milk circuit with hot
water.
Deep clean programme
-
The deep clean programme for the Capp in Cup system includes the careful
cleaning of the whole milk circuit using the Philips "Milk circuit cleaner"
product.
Accurate cleaning of the Capp in Cup system under
running water
Warning: the steam wand may be hot after use.
1 Remove the Capp in Cup system from the steam wand (fig. 23).
2 Remove the rubber handle from the steam wand. (fig. 24).
3 Remove the spout from the Capp in Cup system (fig. 25).
4 Remove the suction tube from the main body of the Capp in Cup system
(fig. 26).
5 To disassemble the main body:
hold it tight from the sides as shown (fig. 27);
-
pull and extract the left part as shown (fig. 28);
-
6 Remove the rubber lid (fig. 29).
7 Remove the milk carafe (fig. 30).
8 Wash all the components under running water.
9 After cleaning, reassemble all the components by following the same
procedure in reverse order.
23/04/2020 09:57:58