Publicité
English
11.2 Putting on the Harness
WARNING
The operator must be able to remove the backpack battery
quickly in the event of an emergency. In an emergency,
open and remove the waist belt and chest strap quickly
before dropping the battery to the ground.
To ensure a proper fit:
► Put the backpack battery on your back.
► Fasten and adjust the waist belt (2) so that it rests
comfortably but securely on your hips.
► Fasten the chest strap (1) and adjust it so that it fits
comfortably but securely across your chest.
► Adjust the harness straps so that the back padding fits
firmly and securely against your back.
► Thread the end of the waist belt through the loop (3).
14
All manuals and user guides at all-guides.com
1
3
12 Connecting the Backpack Battery to the Power Tool
► To remove the harness, open the quick-release fasteners
on the waist belt and chest strap and loosen the harness
straps by lifting the sliding adjusters.
To help reduce the risk of injury in the event of an
emergency, practice quickly opening the fastener on the
waist belt, loosening the shoulder straps and removing the
battery. To avoid damage, ease the battery to the ground
when practicing. Do not allow the battery to drop to the
ground and do not throw it.
12 Connecting the Backpack Battery to
the Power Tool
12.1 Connecting the Backpack Battery to a Power
Tool with an Integrated Socket
WARNING
Never use a malfunctioning, damaged, cracked, leaking or
deformed battery, @ 5.1. Use and store the battery only
within an ambient temperature range of 14 °F to 122 °F (- 10
°C to 50 °C), @ 5.1.
WARNING
To reduce the risk of unintended activation, never store the
power tool with the connecting cord inserted into the power
tool socket, @ 16. Always remove the connecting cord
before storing the power tool.
0458-794-8221-C
Publicité
