Publicité
English
If one green LED is flashing and four long beeps are emitted:
less than 20 % charge.
10 Assembling the Backpack Battery
10.1 Attaching the Connecting Cord
To attach the connecting cord:
1
► Unplug the battery from the power tool.
► Remove the cover (1).
► Pass the plug (3) through the opening in the back plate.
► Insert the plug in the battery's socket (2) and turn it
clockwise until it engages with an audible click.
► Replace the cover.
10.2 Attaching and Removing the Rain Cover
WARNING
To reduce the risk of a short circuit, which could lead to
electric shock, fire and explosion, keep the battery dry.
Protect it from rain, water and other liquids.
The rain cover is designed to protect the battery from rain
during operation.
12
All manuals and user guides at all-guides.com
2
3
10 Assembling the Backpack Battery
To attach the rain cover:
► Unplug the battery from the power tool.
► Make sure the rain cover is dry and in good condition,
without any tears, holes or other damage. Never use a wet
or damaged rain cover.
► Before starting work in rain or in very damp conditions,
make sure that the power tool to be connected to the
battery is approved for use in the rain or damp conditions.
► Put the rain cover over the battery and attach it to the
frame of the backpack with the zipper.
► Unzip to remove the rain cover after finishing work.
Always confirm that the battery and AP Adapter are dry
before charging or storing the battery.
► Allow the rain cover to dry before storing. Store the rain
cover in a dry location.
10.3 Attaching the Pouch
WARNING
Never transport metallic, pointed or sharp objects in the
pouch. They may bridge the contacts in the adapter and
cause a short circuit.
0458-794-8221-C
Publicité
