Publicité
3.3
Scope of delivery
1 SILENT cubeCAM
en
1 Dust bag (inserted ready for use in dust drawer)
1 Quick Start Guide
1 Power cord
1 Suction hose, 2 m, incl� 2 end bushings
3.4
Accessories
2921 0003 End bushing set, 2x
2934 0007 90° angled connector SILENT
90003 4240 Suction hose
90003 4826 Suction hose, antistatic, 3 m, incl� 2 end bushings
90115 0823 Suction hose, inside diameter 38 mm, 6 m
90215 0823 Suction hose, inside diameter 38 mm, 9 m
90003 4305 Adapter for hose connection
90003 4430 Universal suction hose adapter
90003 4314 Y-junction
2926 0000 Extractor switch
2934 0005 Interface cable, type A, for vhf
2934 0006 Interface cable, type B, for Roland DG
2934 0008 Interface cable, type C, for imes-icore
2934 0009 Interface cable, type D, for Amann Girrbach
2934 0010 Interface cable, type E, for Yenadent/Origin + Nema adapter
2934 0011 Interface cable, type F, for Zirkonzahn
2934 0012 Interface cable, type F, for Zirkonzahn + C14 adapter
2934 0013 Interface cable type G for vhf with 6-pin connection
2934 0016 Interface cable type H for Dentsply Sirona
2934 0017 Interface cable type I for Up3D
2934 0018 Interface cable type J for Canon
2934 0021 Interface cable type M for XTCERA
4
Startup
4.1
Unpacking
⇒ Remove the equipment and accessories from the package�
⇒ Check the delivery for completeness (compare with the scope of delivery).
4.2
Setting up the unit
The extraction unit is a standing device� Do not operate it on its side�
Place the extraction unit so that:
• The exhaust air outlet (6, Fig. 1) is not blocked.
• The front is easily accessible for removing the dust drawer�
If the extraction unit is placed in a closed cabinet, the warm exhaust air must be transported out of the
cabinet using one of the following measures:
• Opening in the rear panel of the cabinet, min� 250 x 120 mm, directly opposite the exhaust air out-
let (6, Fig. 1).
- Distance from the rear of the cabinet to the wall:
- Distance from the extraction unit to the rear of the cabinet: max. 25 mm.
• Remove the rear panel of the cabinet, distance from the rear of the cabinet to the wall min� 50 mm�
If the warm exhaust air is transported out of the cabinet to the rear through openings, it must be ensured
that the warm exhaust air can escape from there unhindered�
min. 100 mm,
- 6 -
Publicité
