Removal From Service, Demounting, Disassembly; Storage; Disposal - molex UP 60 Mode D'emploi

UP 60
14

Removal from Service, Demounting, Disassembly

DANGER!
 Due to the risk of hand or finger injury, never try to reach into the machine before
having assured that the machine is disconnected from the air supply. Disconnect
the air supply before changing the safety guard, the adapter or the dies.
CAUTION!
 Before starting maintenance, disassembly or repair work, the crimping machine
must be disconnected from air supply.
 Maintenance work may be performed only by authorized and properly trained
personnel. The housing and the covers in particular may only be removed by
specially trained personnel.
 When working with the pneumatic Universal Crimp Machine UP 60, do not wear
loose clothing, jewellery or long, loose hair that can get caught in the pneumatic
Universal Crimp Machine UP 60.
 Only one person is allowed to work on or with the machine at a time!
 Work with caution.
15

Storage

Store the machine in the original box at room temperature.
16

Disposal

For the disposal of the pneumatic Universal Crimp Machine UP 60, send it back to Molex.
Page 63 / 104
TM-638018900 REV. B