Basic Safety Instructions; Responsibilities; Notes On Setting Up And Operating The Machine; Notes On Service And Maintenance - molex UP 60 Mode D'emploi

UP 60
2

Basic Safety Instructions

The pneumatic Universal Crimp Machine UP 60 has been constructed according to state-of-the-art tech-
nology and the acknowledged technical safety regulations.
When carrying out jobs such as installation, putting the machine into operation or setting it up, operation,
changing the conditions of use and the mode of operation or carrying out maintenance and service jobs, it
is important to observe the procedures for switching off the machine described in the operating
instruction.
RoHS Information
The pneumatic Universal Crimp Machine UP 60 complies with the EU-Guideline 2002/95/EG (RoHS).
CE
The pneumatic Universal Crimp Machine UP 60 is CE compliant.
2.1

Responsibilities

The pneumatic Universal Crimp Machine UP 60 may only be operated by suitably trained and authorized
personnel. The user must clearly define and observe the responsibilities of the personnel for operation,
set-up, maintenance and service.
It is particularly important to define who is responsible for work on the pneumatic equipment. Such work
should only be carried out by specially trained staff.
Should the user make any changes to the machine without consulting the manufacturers or the suppliers,
the latter will not be liable for any damage that may result.
2.2

Notes on Setting up and Operating the Machine

The pneumatic Universal Crimp Machine UP 60 may only be set up and operated in perfect technical
condition, observing all the safety regulations and considering any possible dangers. Before
commissioning the machine, it is always important to check whether all safety devices, especially the
safety covers, are installed and are functioning correctly.
Safety covers may only be removed when the machine has been disconnected from the air supply. The
housing and the covers in particular may only be removed by specially trained personnel.
If you suspect that the machine cannot be operated safely, it must be switched off and secured against
anyone accidentally switching it on.
The machine may only be used for the purpose specified in the operating instruction.
The manufacturers and suppliers will not be liable for any damages which may result due to the machine
being used for a purpose other than that for which it was intended. This is done entirely at the user's own
risk.
2.3

Notes on Service and Maintenance

Disconnect the pneumatic Universal Crimp Machine UP 60 from the air supply before attempting any
maintenance work.
Page 40 / 104
TM-638018900 REV. B