Maintenance - molex UP 60 Mode D'emploi

UP 60
12

Maintenance

DANGER!
 Due to the risk of hand or finger injury, never try to reach into the machine before
having assured that the machine is disconnected from the air supply. Disconnect
the air supply before changing the safety guard, the adapter or the dies.
CAUTION!
 The compressed air connection tube must not be longer than 1 m and has to have a
coupling connection.
 Before starting maintenance, disassembly or repair work (incl. safety guards), the
crimp machine must be disconnected from air supply.
 Maintenance work may be performed only by authorized and properly trained
personnel. The housing and the covers in particular may only be removed by
specially trained personnel.
 When working with the pneumatic Universal Crimp Machine UP 60, do not wear
loose clothing, jewellery or long, loose hair that can get caught in the pneumatic
Universal Crimp Machine UP 60.
 The crimp machine is only allowed to be used when it is in complete functional
condition.
 The crimp machine is only allowed to be used with mounted adapter, safety guard
and die set. Pay attention to the correct assignment of adapter to safety guard.
 Work with caution.
 Only one person is allowed to work on or with the machine.
 Assure free access to the operating elements of the machine, especially the foot
pedal and the release button. In the case of imminent danger immediately press the
release button. The release button must be within the direct reach of the operator. It
must not be covered.
 It is only allowed to work with the specified working pressure.
Page 59 / 104
TM-638018900 REV. B