Safety; Designed Use; Predictable Misuse; Responsibilities - molex UP 60 Mode D'emploi

UP 60
4

Safety

4.1

Designed Use

- Realization of connections by crimping a cable lug to a cable.
The pneumatic Universal Crimp Machine UP 60 is designed for use with the adapters described in
section 9 and 11. The adapters should only be used with the dies specified by MOLEX.
4.2

Predictable Misuse

Every application which is not mentioned in chapter 4.1 „Designed Use".
-
4.3

Responsibilities

The user of the pneumatic Universal Crimp Machine UP 60 is responsible for making sure that all persons
involved in any way, either in the installation or in maintenance of the machine, have been thoroughly
trained on the system using the this instruction manual.
The user is also responsible for the training of operators and the instruction must include the following
aspects:
- Purpose of the machine
- Hazard zones
- Safety rules and regulations
- Functionality of the various components of the machine
- Proper operation of the machine
To assure full familiarization with the system, the training must be conducted in the native language of the
operators involved.
Staff qualifications required in conjunction with the use of the pneumatic Universal Crimp
Machine UP 60:
Installation
Set-up
Instruction
Operation
Maintenance
Service
The safety instructions, warnings and precautions contained in the individual chapters must be strictly
observed by all users and operators.
Technical personnel with language proficiency in either English, German or
French, in
addition to the native language of the operator
Through qualified personnel trained as indicated above
Technical personnel with proficiency in English, German or French
Page 42 / 104
TM-638018900 REV. B