Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
UP 60
4.4
Hazardous Areas
1.
Hazardous Area: Area of interchangeable crimping dies
Person at Risk:
Type of Hazard:
2.
Hazardous Area: Opened Machine
Person at Risk:
Type of Hazard:
4.5
Safety Precautions
Please observe the national reglementations according to the minimum age of the personnel operating
the pneumatic Universal Crimp Machine UP 60. Allowing younger persons access to the machine is
strictly prohibited.
O
Exercise caution at any time when the pneumatic Universal Crimp Machine UP 60 is switched
on.
O
Operate the pneumatic Universal Crimp Machine UP 60 in a dry and dust free environment
only. The crimp machine is only allowed to be used when it is in complete functional condition.
O
When working with the pneumatic Universal Crimp Machine UP 60, do not wear loose clothing,
jewellery or long, loose hair that can get caught in the pneumatic Universal Crimp Machine UP
60.
O
Prior to starting up the pneumatic Universal Crimp Machine UP 60, make sure it is firmly
positioned on a sturdy stand or bench to prevent it from tipping over.
O
Check the release button before starting the work on the crimp machine.
O
Disconnect the pneumatic Universal Crimp Machine UP 60 from the air supply before
attempting any maintenance work. Due to the risk of hand or finger injury, never try to reach into
the machine before having assured that the machine is disconnected from the air supply.
O
Do not modify the pneumatic Universal Crimp Machine UP 60 nor use it for any purpose for
which it was not intended.
O
Do not operate the pneumatic Universal Crimp Machine UP 60 until you have studied and fully
understood all the instructions described in this instruction manual.
O
In cases of a machine malfunction, production must be stopped and the malfunction must be
fixed before continuing work with the machine.
O
In the case of imminent danger immediately press the release button. The release button must
be within the direct reach of the operator. It must not be covered.
O
Maintenance work may be performed only by authorized and properly trained personnel.
O
Use a chain hoist for the transport of the crimp machine.
O
To hoist the crimp machine use the eyebolt. Make sure that the eyebolt is securely tightened.
O
During transport and installation of the machine wear suitable safety shoes.
O
The machine is not allowed to be used without a mounted adapter and suitable safety guard.
O
For maintenance work wear adequate protective gloves and safety glasses.
O
Only one person is allowed to work on or with the machine.
O
Only trained personal are allowed to work on or with the machine.
O
It is only allowed to work with the specified working pressure.
Operator
Danger of Crushing
Installation Engineer
Direct or indirect contact with movable parts of the machine,
Danger of Cutting
Danger of Crushing
Page 43 / 104
TM-638018900 REV. B
Publicité
Chapitres
Table des Matières
