Problem Handling And Fault Diagnostics - molex UP 60 Mode D'emploi

UP 60
13

Problem Handling and Fault Diagnostics

DANGER!
 Due to the risk of hand or finger injury, never try to reach into the machine before
having assured that the machine is disconnected from the air supply. Disconnect
the air supply before changing the safety guard, the adapter or the dies.
CAUTION!
 Before starting maintenance, disassembly or repair work, the crimping machine
must be disconnected from air supply.
 Maintenance work may be performed only by authorized and properly trained
personnel. The housing and the covers in particular may only be removed by
specially trained personnel.
 When working with the pneumatic Universal Crimp Machine UP 60, do not wear
loose clothing, jewellery or long, loose hair that can get caught in the pneumatic
Universal Crimp Machine UP 60.
 Work with caution.
 Before commissioning the machine, it is always important to check whether all
safety devices, especially the safety guards and die adapter, are installed and are
functioning correctly.
 Check the release button before starting the work on the crimp machine. In the case
of imminent danger immediately press the release button. The release button must
be within the direct reach of the operator. It must not be covered.
INFORMATION:
In case of a blockade of the dies press the release button and disconnect the machine
from air supply.
In the event of a problem our customer service personnel will be able to help you.
Molex Application Tooling Group
2200 Wellington Court
Lisle, IL 60532, USA
Phone: +1 (630) 969-4550
Fax: +1 (630) 505-0049
Homepage: www.molex.com
Please have the following information ready when you contact service.
- Machine Type
- Machine serial number
Page 62 / 104
TM-638018900 REV. B