Selecting The 'Basket Cycle' Feature; Use As A Variable Temperature Kettle - SOLIS Tea Maker Prestige Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SELECTING THE 'BASKET CYCLE' FEATURE

This feature continuously auto lifts and lowers the Basket during the tea brewing cy-
cle. This movement loosens the tea leaves within the Basket, allowing the heated wa-
ter to circulate freely around the tea leaves for maximum infusion.
NOTE: The 'Basket Cycle' can significantly increase the rate of infusion and af-
fect the tea strength. You may consider reducing the initial tea strength / brew
time (see Page 107 and 114) when using the 'Basket Cycle' feature.
NOTE: It is recommended that this feature is used only when making between
1000mL (approx. 4 cups) to 1200mL (approx. 5 cups).
1. To activate the 'Basket Cycle' feature, press the BASKET button once. The but-
ton surround will illuminate and the LCD screen will display BASKET CYCLE.
2. During the brewing cycle, the BASKET button surround will flash while the Bas-
ket slowly lifts and lowers within the heated water.
3. The 'Basket Cycle' feature can be cancelled anytime during the tea brewing cy-
cle. Press the BASKET button once. The button surround will cease to illuminate
and the LCD screen will no longer display BASKET CYCLE. The Basket will return
to the bottom of the Glass Jug for the remaining brewing time.

USE AS A VARIABLE TEMPERATURE KETTLE

The Tea Maker can be used for boiling or heating water to a customisable temper-
ature.
NOTE: If you have used the Glass Jug for making tea we recommend thor-
oughly cleaning the interior of the Jug and removing the Tea Basket before
boiling or heating water.
1. Fill the Glass Jug with the desired amount of water. Do not fill over the water
maximum mark (1500mL WATER MAX).
2.
a. To boil water (100°C):
Press the left
The 'Custom' LED will automatically illuminate.
b. To heat water to a customised temperature:
Press the left
ARROW DOWN button to decrease the temperature. The temperature
can be adjusted in 5°C increments from 50°C to a maximum of 100°C (or
in the Fahrenheit mode, 5°F increments from 120°F to a maximum of
212°F). The 'Custom' LED will automatically illuminate.
110
ARROW UP button to increase the temperature to 100°C.
ARROW UP button to increase the temperature, or the left

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

585

Table des Matières