SOLIS Tea Maker Prestige Mode D'emploi page 90

• To avoid scalding, never fill the Glass Jug past the 'WATER MAX' (when heating
water) or 'TEA MAX' (when brewing tea) line markings.
• Do not operate the appliance without water. Always fill the Glass Jug to at least
the 'MIN' marking. Should it be operated without water, the boil-dry protection
will shut the power off automatically. Allow the appliance to cool before refill-
ing.
TO PROTECT AGAINST ELECTRIC SHOCK, DO NOT IMMERSE THE GLAS JUG
BASE, POWER BASE, POWER CORD OR POWER PLUG IN WATER OR AL-
LOW MOISTURE TO COME IN CONTACT WITH THESE PARTS.
Please refer to cleaning instructions on page 120 of the Instruction Booklet.
• Do not remove the Glass Jug from the Power Base during heating or when the
basket is in operation. Ensure the appliance has completed the water heating or
tea brewing cycle before removing the Glass Jug from the Power Base.
DO NOT OPERATE THE APPLIANCE ON AN INCLINED SURFACE. DO NOT
MOVE THE APPLIANCE WHILE IT IS SWITCHED ON.
• The use of accessory attachments not recommended by SOLIS may result in fire,
electric shock or injury to persons.
• To turn OFF the appliance, press the TEA|Cancel button (when brewing tea) or
the HOT WATER|Cancel button (when heating water) on the Power Base.
• The appliance is OFF when all button surround illuminations go out.
• To disconnect from the wall outlet, first turn OFF the appliance then remove the
power plug from the wall outlet.
• When the appliance is not in use or when left unattended, disconnect the power
cord from the wall outlet.
• Before attempting to move the appliance or before assembling or disassembling
parts, cleaning or storing, turn OFF the appliance, allow to cool and disconnect
from the wall outlet.
• Allow the appliance to cool down in between brewing cycles.
90