Use As A Tea Maker For Brewing Tea - SOLIS Tea Maker Prestige Mode D'emploi

■

USE AS A TEA MAKER FOR BREWING TEA

1. Remove the Glass Jug from the Power Base and remove Jug Lid and Basket.
When brewing tea, fill with desired amount of water. Ensure you do not fill past
the tea maximum mark (1200mL TEA MAX).
FILLING PAST THE 'MAX' LINE MAY RESULT IN SERIOUS BURNS OR IN-
JURIES AS A RESULT OF OVERFLOWING HOT OR BOILING WATER. FILLING
BELOW THE 'MIN' LINE WILL RESULT IN THE TEA MAKER SWITCHING OFF
BEFORE THE WATER HAS BOILED OR REACHED THE SELECTED TEMPER-
ATURE.
2. Place the Basket on a flat, dry surface.
Remove Basket Lid by lifting from the
sides.
3. Use the provided Tea Scoop to fill the
Basket with tea leaves. As a general
guide, use 1 scoop of tea leaves per
cup / 250ml of water, however this will
depend on the instructions on tea pack-
aging and your personal preference (See
Page 99, Water to Tea Scoop Ratio).
4. Replace the Basket Lid on top of the
Basket. Ensure lid is securely snapped in
place by pressing firmly on the centre of
the lid.
5. Slide the assembled Basket on to the
magnetic post located within the Glass
Jug. The assembled Basket will attach it-
self to the top of the magnetic post. Re-
place Jug Lid.
106