SOLIS Tea Maker Prestige Mode D'emploi page 124

POSSIBLE PROBLEM
Tea Maker will not switch 'ON'
The Tea Maker will not work
The backlight of the LCD screen
has gone out
I cannot select a certain function
124
EASY SOLUTION
• Check that the power plug is securely
inserted into the outlet
• Insert the power plug into an independent
outlet
• Insert the power plug into a different outlet
• Reset the circuit breaker if necessary
• For additional safety the Tea Maker is fitted
with a thermal cut out. In the event of
severe overheating, the Tea Maker will
automatically shut down to prevent further
damage. Should this continue, call the
SOLIS Customer Service Centre.
• Check that the Glass Jug is securely positio-
ned on the Power Base.
• The Tea Maker goes into standby mode if
not used for 3 minutes. When in standby
mode, the backlight of the LCD screen will
switch off and the current time will appear
on the display.
• To re-activate the Tea Maker out of standby
mode:
- Remove then replace the Glass Jug from
the Power Base.
- Press any button on the Power Base
except the HOT WATER|Cancel or
TEA|Cancel buttons. The backlight of the
LCD screen will illuminate and the LCD
screen will go to operation mode.
• Certain features cannot be selected or
changed during the heating or brewing
cycle. The LCD screen may temporarily
change or a sound alert may be heard, but
no changes to the cycle will be made.