SOLIS Tea Maker Prestige Mode D'emploi page 108

7. To select a preset tea strength:
a. Press the TEA STRENGTH button and toggle through until the desired tea
strength – 'Strong', 'Medium' or 'Mild' illuminates.
b. The LCD screen will display the preset brew time recommended to achieve
the selected brew strength for the tea type selected. This is displayed as the
right figure on the LCD screen.
8. Press the TEA|Cancel button to start the tea brewing cycle. The button surround
will illuminate and the LCD screen will display 'ON' and the real-time heating
progress in increments of 5°C. Once the water temperature reaches 50°C, 'ON'
will be replaced by the selected brew time.
NOTE: The 'BREW TIME' can be adjusted during the heating process but
'BREW TEMP' cannot be changed once the heating cycle commences.
To change the brew time press the right
the time, or the right
brewing time can be adjusted in 30 second increments up to a maximum of
10 minutes.
To change the brew temperature, press the TEA|Cancel button to cancel the
heating cycle. Re-select the brew temperature (see Page 107 and 114).
9. Once the selected brew temperature is reached the assembled Basket will au-
tomatically lower into the heated water.
10. Once the Basket reaches the bottom of the Glass Jug, the LCD screen will indi-
cate the brewing progress, automatically counting down in one second incre-
ments. This is displayed as the right figure on the LCD screen.
11. At the end of the tea brewing cycle, the Basket will automatically rise to the top
of the Glass Jug to prevent over-brewing. The tea alert will sound three times.
In the LCD screen, "Time Since Brew" and the count-up will display. This count-
up indicates, since when the tea brewing cycle has been completed. The feature
"Time Since Brew" will count up to 60 minutes, then will automatically switch
off.
THE TEA BASKET IS HOT TO TOUCH AFTER TEA IS BREWED. ENSURE THE
TEA BASKET HANDLE HAS COOLED BEFORE HANDLING.
108
ARROW DOWN button to decrease the time. The
ARROW UP button to increase