Preparing The Tea Maker For Use - SOLIS Tea Maker Prestige Mode D'emploi

■

PREPARING THE TEA MAKER FOR USE

In order to remove any dust or protective residues from the manufacturing process,
it is recommended to run a boiling cycle then discard the water.
1. Remove and safely discard any packing material, promotional labels and tape
from the Tea Maker.
2. Remove the Jug Lid then remove the Tea Basket from the magnetic post within
the Glass Jug. Wash the Jug Lid, Tea Basket, Basket Lid and Tea Scoop in warm
soapy water with a soft sponge, rinse and dry thoroughly.
NEVER IMMERSE THE BASE OF THE GLAS JUG, THE POWER BASE, POWER
CORD OR POWER PLUG IN WATER OR ALLOW MOISTURE TO COME IN
CONTACT WITH THESE PARTS.
3. Place the Power Base on a flat, dry surface.
4. Without the Tea Basket in place, fill the Glass Jug to the water maximum mark
(1500mL WATER MAX) and place on the Power Base. Securely fit the Jug Lid onto
the Glass Jug.
NEVER FILL THE GLAS JUG WITH CHILLED WATER. ALLOW THE TEA
MAKER TO COOL BEFORE REFILLING.
FILLING PAST THE 'MAX' LINE MAY RESULT IN SERIOUS BURNS OR IN-
JURIES AS A RESULT OF OVERFLOWING HOT OR BOILING WATER. FILLING
BELOW THE 'MIN' LINE WILL RESULT IN THE TEA MAKER SWITCHING OFF
BEFORE THE WATER HAS BOILED OR REACHED THE SELECTED TEMPER-
ATURE.
5. Unwind the power cord completely and insert the power plug into a grounded
wall outlet.
6. The LCD screen will illuminate with the default brew temperature and brew time
display.
102