Publicité
9.2 Setting up Home Connect®
Requirements
¡ The appliance is connected to the power supply and is
switched on.
¡ You have a mobile device with a current version of the
iOS or Android operating system, e.g. a smartphone.
¡ The Home Connect® app is installed on your mobile
device.
¡ The mobile device is in the vicinity of the appliance.
¡ The mobile device and the appliance are within range of
your home network's Wi-Fi signal.
Open the Home Connect® app and scan the following
1.
QR code.
Follow the instructions in the Home Connect® app.
2.
9.3 Wi-Fi symbol
The Wi-Fi indicator on the main screen changes according
to the status and quality of the connection and the
availability of the Home Connect® server.
status
Lights up steadily at half
brightness.
Flashes at full brightness.
Lights up steadily at full
brightness.
Flashes.
Switched off.
9.4 Adding or removing a Wi-Fi home
network
The following overview shows how to add or remove a Wi-
Fi home network.
Wi-Fi home network
status
No Wi-Fi home network
stored.
The Wi-Fi home network
has now been saved.
1
Available depending on software version. Further information on availability can be found on the website.
Description
No network connection
saved.
Network connection is
being established.
Network connection saved
and Wi-Fi active.
Network settings are reset.
Network not active.
Action
To add the Wi-Fi home
network, briefly press
.
To pair another appliance,
press and hold
.
Wi-Fi home network
status
The Wi-Fi home network
has now been saved.
9.5 Changing settings via the
Home Connect® app
You can use the Home Connect® app to change the
settings for the cooking zones and send them to the
cooktop.
Requirement: The cooktop is connected to the home
network and to the Home Connect® app.
Select the setting in the Home Connect® app and send
1.
it to the cooktop.
Follow the instructions in the Home Connect® app.
Settings that you send from the Home Connect® app to
the cooktop must be confirmed on the cooktop.
a As soon as cooking settings are transmitted to a
cooking zone, the display starts to flash, depending on
the setting.
Press
to confirm the setting.
2.
To discard the setting, press any other touch field on
3.
the cooktop.
9.6 Activating Bluetooth® detection
This wireless technology enables automatic presence
detection. Provided you are near the cooktop, you no
longer need to confirm settings from your mobile device on
the cooktop. If you send settings to a cooking zone, you
can confirm these from your mobile device. If you send
settings to a cooking zone, you can confirm these directly
from your mobile device. The cooktop is connected to the
Wi-Fi and to the Home Connect app.
Requirements
¡ The cooktop is connected to the home network and to
the Home Connect® app.
¡ Bluetooth is connected to the mobile device.
¡ The user is near the cooktop.
Open the Home Connect® app.
1.
In order to set Bluetooth® detection, follow the
2.
instructions in the Home Connect® app.
9.7 Software update
Your appliance's software can be updated using the
software update function, e.g. for the purposes of
optimization, troubleshooting or security updates.
To do this, you must be a registered
Home Connect® user, have installed the app on your
mobile device and be connected to the
Home Connect® server.
Home Connect® en-us
Action
To reset the Wi-Fi home
network settings, press and
hold
. If
flashes, press
and hold
again.
1
19
Publicité
