Publicité
en-us Operation
This function is available for all cooking zones, provided
the other cooking zone on the same side is not in use.
Otherwise, and flash on the display for the selected
cooking zone.
then switches on automatically.
Recommended applications
¡ Do not place a lid on the frying pan.
¡ Never leave pans unattended when they are heating up.
¡ Only use cold pans.
¡ Use pans with a completely flat base. Do not use pans
with a thin base.
Switching on ShortBoost
Requirement: Assign the function to
→ "Favorite button", Page 13 .
Select the cooking zone.
1.
Touch
.
2.
lights up.
a
a The function has now been activated.
Switching off ShortBoost
Select the cooking zone.
1.
Select the power level.
2.
goes out
a
a The function is switched off.
Note: To avoid high temperatures, this function
automatically switches itself off after 30 seconds.
8.9 Keep warm function
You can use this function to melt chocolate or butter, and
to keep meals warm.
You can activate the function via Home Connect® or
Favorite button.
Switching on Keep warm function
Requirement: Assign the function to
→ "Favorite button", Page 13 .
Select the required cooking zone.
1.
Touch
.
2.
lights up.
a The function is switched on.
Switching off Keep warm function
Select the cooking zone.
1.
Set to
2.
1
Available depending on software version. Further information on availability can be found on the website.
14
.
1
.
goes out.
a The function is switched off.
8.10 AutoChef®
This function allows you to melt, prepare sauces, sauté,
deep fry or fry while keeping the temperature under
control.
Instead of constantly adjusting the power level during
cooking, select the required target temperature once at the
start. The sensors under the glass ceramic measure the
temperature of the cookware and keep it constant
throughout the entire cooking process.
This function is available on the cooking zones marked
with the symbol
.
Functions
Temperature in °F (°C)
Melting
160-175 (70-80)
Sauces
230-250 (110-120)
Stir-frying
285 (140)
Deep-frying
320 (160)
Pan-frying
355-390 (180-200)
Grilling
430 (220)
Switching on AutoChef®
Place the empty cookware on a cooking zone.
1.
Select the cooking zone.
2.
Press
.
3.
a ,
and the preset temperature light up on the display
for the selected cooking zone.
a The temperature is displayed in °F by default. You can
change the display to °C in the basic settings.
→ "Basic settings", Page 17
Select the temperature by swiping your finger over the
4.
settings area.
a flashes until the set temperature is reached again.
a The selected temperature and the development of the
temperature reached in the pan flash alternately until
the selected temperature has been reached.
a The temperature shown on the displays is approximate
and may differ from the actual temperature in the frying
pan.
a Once the temperature has been reached, a signal tone
sounds, and as well as the temperature symbol stop
flashing.
Add the frying fat and then the food to the frying pan.
5.
Note: If you need to cook with more than 250 ml oil, add
the oil and wait a few seconds before you add the food.
Switching off AutoChef®
Select the cooking zone and touch
▶
.
Publicité
