Publicité
5.2 Distribution of the cooking zones
( ) = cm
5.3 Cooking zone
Before you start cooking, check whether the size of the
cookware fits the cooking zone that you want to use for
cooking:
Area
Cooking zone type
/
Single cooking zone
Triple-ring cooking zone
This cooking zone switches on automatically
when you use cookware with a base that
corresponds to the size of the outer cooking
zone.
5.4 Residual heat indicator
The cooktop has a residual heat indicator for each cooking
zone. Do not touch the cooking zone if the residual heat
indicator is lit.
Display
Meaning
The cooking zone is hot.
The cooking zone is warm.
6 Before using for the first time
Before using for the first time
Observe the following recommendations.
Before using for the first time
6.1 Initial cleaning
Remove any leftover packaging from the cooktop surface
and wipe the surface with a damp cloth. You can find a list
of recommended detergents on the official website
www.bosch-home.com.
Further information on care and cleaning. → Page 21
Before using for the first time en-us
6.2 Induction cooking
In comparison to conventional cooktops, cooking on an
induction cooktop brings with it a series of changes and
has a number of benefits such as time savings when
cooking and frying, energy savings, as well as greater
ease of cleaning and care. It also offers improved heat
control as the heat is generated directly in the cookware.
6.3 Cookware
You can find a list of recommended cookware on the
official website www.bosch-home.com.
Further information on suitable cookware. → Page 9
6.4 Configuring Home Connect
When you first switch on the appliance, you will be
prompted to set your home network.
seconds on the display panel.
To begin the connection to Home Connect, touch
proceed in accordance with the information in the section .
To end the configuration process, switch off the cooktop.
You can also configure Home Connect® at a different
time.
7 Software update
Software update
If the appliance is connected to Home Connect®, some
Software update
functions may be available with a software update.
More information on the availability of additional functions
can be found on the website www.bosch-home.com/us/
experience-bosch/home-connect.
8 Operation
Operation
Here you will find everything you need to know about
Operation
operating your appliance.
8.1 Switching on the cooktop
Touch
.
▶
A signal tone sounds. The symbols for the cooking
zones and the currently available functions light up.
lights up in the cooking zone displays.
a The cooktop is ready to use.
ReStart
If you switch the appliance on again within 4 seconds of
▶
switching it off, the cooktop operates with the settings
that were previously set.
8.2 Switching off the cooktop
Touch
until the displays go out.
▶
a All cooking zones are switched off.
Note: The burner switches off automatically if all cooking
zones have been switched off for more than 25 seconds.
lights up for a few
and
11
Publicité
