Publicité
3V-490072NU – 06/23
How do you create a waiting phase in a programme?
Entering a set temperature of 32°F starts a waiting phase where nothing happens (no heating).
How do you create a temperature hold phase?
In Auto mode selecting a time of 99h00 is interpreted as a holding phase (no cooking) in the mode and temperature selected.
How do you view the cooking phases in a recorded or programmed recipe?
It is possible to view the phases of a recipe by pressing the detail button « ? ».
How do you adjust the cooking during a factory recipe?
For factory recipes the colouration and degree of cooking can be adjusted even after the cooking cycle has started.
Can you illustrate the recipes?
In the client library: you can link a photo to a recipe and display just the recipes that have a photo. (Auto / Modifier / Photo)
Can you protect recorded recipes?
It is possible to lock access to modification / erase / copy recipes (client parameters).
How can you identify a copy from the original recipe?
A copied recipe is symbolised by a « * » before the name.
How can you change the name of a « client » recipe?
The name of a « client » recipe can be personalised: Modify /click on the name or family zone / Change the name or family.
Why can't I modify my recipes in auto mode?
Because « Modify » is de-activated in client parameters.
Can you preheat the unit automatically?
The automatic preheat function can be activated or deactivated when powered up (bratt pan preheat). The preheat temperature is equally
programmable (client parameters).
How do you know the unit is up to temperature (is ready...)?
It is possible to activate Preheat function in manual mode. The Stop start button displays a bar graph: when the button is entirely green
(an audible signal will sound) the working temperature has been reached.
Can you programme recipes in multi zone mode?
The programmes in the VULCAN recipe library named « Boiling pan 6 timers » and « Sous vide regen. 6 timers » allow you to trigger a
specific time countdown for each zone with an audible alarm at the end of the countdown. The programme in the VULCAN recipe library
named « Plancha high gradient» allow you to trigger a specific time countdown for each zone with an audible alarm at the end of the
countdown.
At what interval should maintenance be planned?
A service message appears when necessary 10 days before maintenance is required.
How do you access client parameters?
Access to the « client parameters» menu is via a PIN code, by default « 0000 » this can be personalised DO NOT LOOSE THE NEW
CODE!
Why can't I access installer and technician parameters?
Access to these parameters is by PIN code and reserved for the installation and after sales technicians.
Does the unit have a standby mode?
The unit has an automatic standby mode that can be personalised in client parameters, this puts the unit principal functions into stand by (blank
screen).
Can the welcome message be personalised?
The logo and welcome message can be personalised in client parameters. One can change the message, the photo gallery allows you to select
welcome Photo or Logo.
How do you recover HACCP data?
Le menu Service /Echange de données, permet la gestion HACCP : démarrage de l'enregistrement automatique des données
HACCP, Visualisation directement sur l'appareil ou bien export sur clé USB, en format compatible Tableur.
Can you access energy and consumption cost data ...?
In the menu for Service / Data exchange / consumption, daily consumption and monthly figures for the last 12 months are stored for water,
electricity/gas detergent. A direct display in the desired currency is available if the corresponding costs are entered in "Client parameters".
What is « safe, limp » mode?
In the event of a failure of the facia panel electronics or display, it is possible to start the "safe" mode: Bratt pan mode at the preheating
temperature (set in the client parameters or 350°F by default). When this "safe" cooking mode is started, actions on the front panel are not
taken into account.
How do you start the « safe, limp » function?
Turn off and then turn on the braising pan again and then open and close the cover 3 times in less than 10s.
It is also possible to reset the interface opening and closing the cover 6 times in less than 10 seconds.
How do you stop the « safe, limp » function?
Simply turn the power off.
F49571 (07-23)
11 GUIDANCE AND INFO ABOUT THE CONTROL SCREEN
Page 17
VULCAN
A division of ITW Food Equipment Group LLC
P.O. Box 696
Louisville, KY 40201
EN
Publicité
