Stihl MSA 160 T Notice D'emploi page 8

English
Do not operate an easily
–
combustible surface (e. g., paper,
textiles) or in an easily combustible
environment – risk of fire!
Do not operate in a hazardous
–
location, i.e. in a location where
there are combustible liquids
(fumes), vapors or dusts. Chargers
can produce sparks, which may
ignite the dust or vapors – risk of
explosion!
Check the charger's con-
necting cord regularly for
damage. If the power
cord is damaged, imme-
diately disconnect the
plug from the wall outlet –
risk of electric shock!
Never jerk the power cord to
–
disconnect it from the wall outlet. To
unplug, grasp the plug, not the cord.
Have a damaged connecting cord
repaired by an experienced
electrician
Do not use the connecting cord for
–
any other purpose, e. g. for carrying
or hanging up the charger
Never use connecting cords that do
–
not comply with regulations
To reduce the risk of stumbling,
–
position and mark the connecting
cord so that it cannot be damaged
or endanger others
To reduce the risk of electric shock:
Always connect the cord to a
–
properly installed wall outlet
Make sure the insulation of the
–
power cord and plug is in good
condition
6
All manuals and user guides at all-guides.com
After using the charger, unplug it from
the socket.
Before starting work
Before starting work in the tree, check at
ground level that the chain saw is safe to
operate – refer to appropriate chapters
in the Instruction Manual:
Functional chain brake, front hand
–
guard
Correctly mounted guide bar
–
Correctly tensioned chain
–
Trigger switch and trigger interlock
–
must move easily – switches must
return to initial position when
released
Trigger switch is locked when the
–
trigger interlock is not depressed
Never attempt to modify the controls
–
or safety devices in any way
Keep the handles dry and clean –
–
free from oil and dirt – for safe
control of the chain saw
Sufficient chain oil in the tank
–
Check contacts in the battery
–
compartment of the chain saw for
foreign matter and dirt
Fit the battery correctly – it must
–
engage audibly
Do not use defective or deformed
–
batteries
The chain saw should only be used if it
is in full working order – risk of accident!
Switching on the chain saw
Ensure a firm and secure footing. Hold
the chain saw securely.
Your chain saw is a one-person saw. Do
not allow other persons to be near the
running pole pruner.
Do not activate the trigger switch if the
saw chain is in a cut.
Switch on as described in the Instruction
Manual – see "Switching on the
machine".
During operation
When working in a tree, always secure
the tree surgery chain saw with a rope –
attach rope to the ring on the back of the
chain saw.
MSA 160 T