Stihl MSA 160 T Notice D'emploi page 24

English
Light Emitting Diodes (LED)
on Charger
1
The light emitting diode (1) on charger
glows continuously green or flashes red.
Green continuous light ...
... indicates the following:
The battery
is being charged
–
is too hot and must cool down
–
before charging
See also "Light Emitting Diodes (LEDs)
on Battery".
The green light emitting diode on the
charger goes off as soon as the battery
is fully charged.
22
All manuals and user guides at all-guides.com
Red flashing light ...
... indicates the following:
No electrical contact between
–
battery and charger – remove and
refit the battery
Malfunction in battery – see also
–
"Light Emitting Diodes (LEDs) on
Battery".
Malfunction in charger – have
–
checked by a servicing dealer.
STIHL recommends a STIHL
servicing dealer.
Switching On
When delivered, the battery is not fully
charged.
It is advisable to charge the battery
completely before using it for the first
time.
Remove the chain scabbard
N
Secure the chain saw so that it
N
cannot be accidentally switched on
again – press the hand guard
forward towards the tip of the bar
(position ƒ)
Inserting the battery
Insert battery in the battery
N
compartment of the machine –
press gently until it clicks into place
– top of battery must be flush with
the top edge of the housing
MSA 160 T