voestalpine Bohler Welding URANOS 2000 SMC Mode D'emploi page 32

SETUP
Lock/unlock
551
Allows the locking of the panel controls and the insertion of a protection code.
EN
Refer to section "Lock/unlock (Set up 551)".
Buzzer tone
552
Permits adjustment of the buzzer tone.
Minimum
0/off
Circuit resistance calibration
705
Allows the calibration of the system.
Refer to section "Circuit resistance calibration (set up 705)".
Current reading
751
Allow the real value of the welding current to be displayed.
Voltage reading
752
Allows the real value of the welding voltage to be displayed.
Wire speed reading
757
Allow the value of the motor encoder 1 to be displayed.
Current reading (motor 1)
760
Allow the real value of the current to be displayed (motor 1).
5.2 Specific procedures parameters
5.2.1 7 segment display personalisation
It allows you to constantly view the value of a parameter on the 7-segment display.
5.2.2 Lock/unlock (Set up 551)
Allows the locking of the panel controls and the insertion of a protection code.
Maximum Default
10 10
Select the required parameter by rotating the encoder.
Parameter selection
Select the required parameter (551).
32
.
.