voestalpine Bohler Welding URANOS 2000 SMC Mode D'emploi page 27

Slope-up
6
Allows you to set a gradual passage between the initial current and the welding current.
Minimum Maximum
0/off 99.9 s
Welding current
7
Allows the regulation of the welding current.
Minimum Maximum
3 A Imax
Bilevel current
8
Permits adjustment of the secondary current in the bilevel welding mode.
At the first release there is the ramp to go up to the current "I1".
Minimum Maximum
3 A Imax
Basic current
10
Permits adjustment of the base current in pulsed and fast pulse modes.
Minimum Maximum
3 A Isald
Pulsed frequency
12
Allows activation of the pulse mode.
Minimum Maximum
0.1 Hz 25 Hz
Pulsed duty cycle
13
Allows regulation of the duty cycle in pulse welding.
Allows the peak current to be maintained for a shorter or longer time.
Minimum Maximum
1 % 99 %
Fast Pulse frequency
14
Allows activation of the pulse mode.
Minimum Maximum
0.02 KHz 2.5 KHz
Pulsed slopes
15
welding arc.
Minimum Maximum
0/off 100 %
Slope-down
16
Allows you to set a gradual passage between the welding current and the final current.
Minimum Maximum
0/off 99.9 s
Default
0/off
Default
100 A
Default Minimum
- 1%
Default Minimum
- 1%
Default
5 Hz
Default
50 %
Default
0.25 KHz
Default
0/off
Default
0/off
27
SETUP
Maximum Default
200% 50%
Maximum Default
100% 50%
EN