voestalpine Bohler Welding URANOS 2000 SMC Mode D'emploi page 22

EQUIPMENT USE
Synergic curves screen
EN
Welding methods
Allows the selection of the welding method
Synergic welding method
Select however one of suggested synergies in order to take advantage of ignition potentiality, closing arc
features...
Material/gas selection
Lets you select:
Wire diameter
Allows selection of the wire diameter used (mm).
Heading
Allows the display of certain pieces of important information relating to the selected process.
4.6 Programs screen
Allows the storage and management of 4 jobs which can be personalised by the operator.
Programs (JOB)
See the "Main screen" section
• Type of filler metal
• Type of gas
NO PROGRAM
This indicates that the synergic curve selected is unavailable or is not compatible with the other system
Material type/Gas type synergy selection screen
1
Welding methods
2
Material/gas selection
3
Wire diameter
4
Type of filler metal
5
Wire diameter
6
Heading
Manual welding method
1
Functions
2
Selected program number
3
Main parameters of the selected program
4
Description of the selected program
5
Heading
22